API Documentation

Overview

Getting Started

We provide a fully restful API with direct and powerful access to a vast array of features. Companies, developers and researchers can incorporate our innovative services directly into software and services.

To make a Dynu REST request, follow the three steps below.

Note: You can run the examples listed here directly as-is. However, when creating your own application, be sure to update the OAuth keys in your code with those assigned to your own account.

You may also review the IP update protocol to control the state of dynamic DNS service.

IP Update Protocol

Obtain OAuth keys

The OAuth keys consists of client_id and secret. The keys uniquely identify your account and you can create, reset or clear the keys in the API Credentials area of the control panel.

Tip: See how the OAuth keys work by running the example in the next step—the example uses a set of dummy keys so you can easily make your first call by pasting the example as-is into a terminal window.

Get an Access Token

Make a /token call using your application's OAuth keys for the basic authentication values (the keys are the values of your client_id and secret). In the request body, set grant_type to client_credentials. When you run the command, Dynu generates and returns a new access token.

Tip: If you're using cURL, supply the OAuth values like this: -u {Client-Id}:{Secret}. If you're using the Postman tool, enter the client_id and secret values on the Basic Auth tab using the client_id as the username and the secret as the password. Additionally, on the x-www-form-unlencoded tab, specify a grant_type of client_credentials.

Example access token request

curl -v https://api.dynu.com/v1/oauth2/token \
        -H "Accept: application/json" \
        -H "Accept-Language: en_US" \
        -u "EOJ2S-Z6OoN_le_KS1d75wsZ6y0SFdVsY9183IvxFyZp:EClusMEUk8e9ihI7ZdVLF5cZ6y0SFdVsY9183IvxFyZp" \
        -d "grant_type=client_credentials"

Tip: If you're using Windows, we recommend you make cURL calls using a Bash shell. If you're not using cURL calls, set the content-type to application/x-www-form-urlencoded for this request.

Sample response:

{
        "scope": "https://api.dynu.com/v1/Domain/.* https://api.dynu.com/v1/DNS/.* https://api.dynu.com/v1/Email/.*",
        "access_token": "<Access-Token>",
        ;"token_type": "Bearer",
        "expires_in": 28800
}

Note: The access token is valid for the number of seconds specified in the expires_in response value. You must have a valid access token to make API requests—request a new token when the current one expires.

Make an API call

With a valid access token in hand, you're ready to make a request to a REST interface. Below is call to obtain a list of domain names which have DNS service. The simple request uses only the required input fields.

The access token is an OAuth bearer token, and is included in the header of your requests with the following syntax: Authorization: Bearer <Access-Token>.

Important: You must supply a valid access token to complete this request (generate a valid token using the example call above).

Example /dns/domains request

curl -v https://api.dynu.com/v1/domain/domains \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

If the call is successful, Dynu returns a list of domain names along with their basic details. You can find the same list of domain names in the control panel.

Response

  [
    {
      "id": 1,
      "user_id": 11,
      "name": "example.com",
      "unicode_name": "example.com",
      "token": "domain-token",
      "state": "complete",
      "language":null,
      "lockable": false,
      "auto_renew": true,
      "whois_protected": false,
      "expires_on": "2018-07-20T15:01:13",
      "created_at": "2015-07-28T15:01:13",
      "updated_at": "2015-09-10T13:03:15"
    },
    {
      "id": 2,
      "user_id": 11,
      "name": "example.org",
      "unicode_name": "example.org",
      "token": "domain-token",
      "state": "complete",
      "language":null,
      "lockable":false,
      "auto_renew": true,
      "whois_protected": false,
      "expires_on": "2016-08-05T23:09:12",
      "created_at": "2015-08-05T23:09:12",
      "updated_at": "2015-09-10T13:05:38"
    }
  ]

Ping

Ping to verify connectivity to our platform

GET /v1/ping

Example

Ping to get a Success response.

curl -v https://api.dynu.com/v1/ping \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the response.

    {
      "type": "Success",
      "message": ""
    }

Domain Registration

Domains

Get a domain

GET /v1/domain/get/:domain

Parameters

Name	Type	Description
:domain	string, integer	The domain name or id

Example

Get the domain with ID 1.

curl -v https://api.dynu.com/v1/domain/get/1 \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Get the domain example.com.

curl -v https://api.dynu.com/v1/domain/get/example.com \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the domain.

    {
      "id": 1,
      "user_id": 11,
      "name": "example.com",
      "unicode_name": "example.com",
      "token": "domain-token",
      "state": "complete",
      "language":null,
      "lockable": false,
      "auto_renew": true,
      "whois_protected": false,
      "expires_on": "2018-07-20T15:01:13",
      "created_at": "2015-07-28T15:01:13",
      "updated_at": "2015-09-10T13:03:15"
    }

List domains

List all domains.

GET /v1/domain/domains

Example

curl -v https://api.dynu.com/v1/domain/domains \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful.

Cancel a domain

Cancel the given domain from your account.

DELETE /v1/domain/cancel/:domain

Please note that for domains which are registered with Dynu for over 5 days this will not cancel the domain registration.

Parameters

Name	Type	Description
:domain	string, integer	The domain name or id

Example

Cancel the domain with ID 1.

curl -v https://api.dynu.com/v1/domain/cancel/1 \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Cancel the domain example.com.

curl -v https://api.dynu.com/v1/domain/cancel/example.com \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful with the state being 'Cancelled'.

    {
      "id": 1,
      "user_id": 11,
      "name": "example.com",
      "unicode_name": "example.com",
      "token": "domain-token",
      "state": "Cancelled",
      "language":null,
      "lockable": false,
      "auto_renew": true,
      "whois_protected": false,
      "expires_on": "2018-07-20T15:01:13",
      "created_at": "2015-07-28T15:01:13",
      "updated_at": "2015-09-10T13:03:15"
    }

Auto-Renewal

Enable auto-renewal for a domain name

Get /v1/domain/autorenewal_enable/:domain

Parameters

Name	Type	Description
:domain	string, integer	The domain name or id

Example

Enable auto-renewal for the domain example.com:

curl -v https://api.dynu.com/v1/domain/autorenewal_enable/example.com \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the domain.

    {
      "id": 1,
      "user_id": 11,
      "name": "example.com",
      "unicode_name": "example.com",
      "token": "domain-token",
      "state": "Complete",
      "language":null,
      "lockable": false,
      "auto_renew": true,
      "whois_protected": false,
      "expires_on": "2018-07-20T15:01:13",
      "created_at": "2015-07-28T15:01:13",
      "updated_at": "2015-09-10T13:03:15"
    }

Disable auto-renewal for a domain name

Get /v1/domain/autorenewal_disable/:domain

Parameters

Name	Type	Description
:domain	string, integer	The domain name or id

Example

Disable auto-renewal for the domain example.com:

curl -v https://api.dynu.com/v1/domain/autorenewal_disable/example.com \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the domain.

    {
      "id": 1,
      "user_id": 11,
      "name": "example.com",
      "unicode_name": "example.com",
      "token": "domain-token",
      "state": "Complete",
      "language":null,
      "lockable": false,
      "auto_renew": false,
      "whois_protected": false,
      "expires_on": "2018-07-20T15:01:13",
      "created_at": "2015-07-28T15:01:13",
      "updated_at": "2015-09-10T13:03:15"
    }

Lock/Unlock

Lock/Unlock a domain name

Get /v1/domains/lock/:domain

Parameters

Name	Type	Description
:domain	string, integer	The domain name or id

Example

Lock the domain name example.com:

curl -v https://api.dynu.com/v1/domain/lock/example.com \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the domain.

    {
      "id": 1,
      "user_id": 11,
      "name": "example.com",
      "unicode_name": "example.com",
      "token": "domain-token",
      "state": "Complete",
      "language":null,
      "lockable": true,
      "auto_renew": true,
      "whois_protected": false,
      "expires_on": "2018-07-20T15:01:13",
      "created_at": "2015-07-28T15:01:13",
      "updated_at": "2015-09-10T13:03:15"
    }

Unlock a domain name

Get /v1/domain/unlock/:domain

Parameters

Name	Type	Description
:domain	string, integer	The domain name or id

Example

Unlock the domain example.com:

curl -v https://api.dynu.com/v1/domain/unlock/example.com \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the domain.

    {
      "id": 1,
      "user_id": 11,
      "name": "example.com",
      "unicode_name": "example.com",
      "token": "domain-token",
      "state": "Complete",
      "language":null,
      "lockable": false,
      "auto_renew": false,
      "whois_protected": false,
      "expires_on": "2018-07-20T15:01:13",
      "created_at": "2015-07-28T15:01:13",
      "updated_at": "2015-09-10T13:03:15"
    }

Name Servers

Get name servers for a domain name

Get /v1/domain/name_servers/:domain

Parameters

Name	Type	Description
:domain	string, integer	The domain name or id

Example

Get name servers for the domain example.com:

curl -v https://api.dynu.com/v1/domain/name_servers/example.com \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the name servers.

  {
    "name servers": [
      "NS1.DYNU.COM",
      "NS2.DYNU.COM",
      "NS3.DYNU.COM",
      "NS4.DYNU.COM",
      "NS5.DYNU.COM"
    ]
  }

Add name servers for a domain name

POST /v1/domain/name_server_add/:domain

Parameters

Name	Type	Description
:domain	string, integer	The domain name or id

Example

Add name servers for the domain example.com:

curl -v https://api.dynu.com/v1/domain/name_server_add/example.com \
        -d "{\"name_servers\": [\"ns6.dynu.com\",\"ns7.dynu.com\"]}" \
        -H "Content-Type: application/json" \
        -H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the name servers.

  {
    "name servers": [
      "NS1.DYNU.COM",
      "NS2.DYNU.COM",
      "NS3.DYNU.COM",
      "NS4.DYNU.COM",
      "NS5.DYNU.COM"
      "NS6.DYNU.COM"
      "NS7.DYNU.COM"
    ]
  }

Delete name servers for a domain name

POST /v1/domain/name_server_remove/:domain

Parameters

Name	Type	Description
:domain	string, integer	The domain name or id

Example

Remove name servers for the domain example.com:

curl -v https://api.dynu.com/v1/domain/name_server_remove/example.com \
        -d "{\"name_servers\": [\"ns6.dynu.com\",\"ns7.dynu.com\"]}" \
        -H "Content-Type: application/json" \
        -H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the name servers.

  {
    "name servers": [
      "NS1.DYNU.COM",
      "NS2.DYNU.COM",
      "NS3.DYNU.COM",
      "NS4.DYNU.COM",
      "NS5.DYNU.COM"
    ]
  }

Make a name server primary for a domain name

POST /v1/domain/name_server_primary/:domain

Parameters

Name	Type	Description
:domain	string, integer	The domain name or id

Example

Make NS3.DYNU.COM the primary name server for the domain example.com:

curl -v https://api.dynu.com/v1/domain/name_server_primary/example.com \
        -d "{\"name_servers\": \"ns3.dynu.com\"}" \
        -H "Content-Type: application/json" \
        -H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the name servers with the primary name server in the beginning.

  {
    "name servers": [
      "NS3.DYNU.COM",
      "NS1.DYNU.COM",
      "NS2.DYNU.COM",
      "NS4.DYNU.COM",
      "NS5.DYNU.COM"
    ]
  }

DNS

Domains

Get a domain

GET /v1/dns/get/:domain

Parameters

Name	Type	Description
:domain	string	The domain name

Example

Get the domain example.com.

curl -v https://api.dynu.com/v1/dns/get/example.com \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the domain.

    {
      "id": 1,
      "user_id": 11,
      "name": "example.com",
      "token": "domain-token",
      "state": "complete",
      "ipv4_address":"174.23.124.56",
      "ipv6_address": "2001:cdba::3257:9652",
      "wildcard_alias": false,
      "ttl": 1800,
      "created_at": "2015-07-28T15:01:13",
      "updated_at": "2015-09-10T13:03:15"
    }

List domains

GET /v1/dns/domains

Example

curl -v https://api.dynu.com/v1/dns/domains \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns a list of domain names.

  [
    {
      "id": 1,
      "user_id": 11,
      "name": "example.com",
      "token": "domain-token",
      "state": "complete",
      "ipv4_address":"174.23.124.56",
      "ipv6_address": "fe80:0000:0000:0000:0202:b3ff:fe1e:8329",
      "wildcard_alias": false,
      "ttl": 1800,
      "created_at": "2015-07-28T15:01:13",
      "updated_at": "2015-09-10T13:03:15"
    },
    {
      "id": 2,
      "user_id": 11,
      "name": "example.org",
      "token": "domain-token",
      "state": "complete",
      "ipv4_address":"216.83.154.36",
      "ipv6_address": "2001:0db8:0000:0000:0240:63ff:feca:9a21",
      "wildcard_alias": false,
      "ttl": 1800,
      "created_at": "2015-08-18T05:01:13",
      "updated_at": "2015-11-10T19:03:15"
    },
    {
      "id": 3,
      "user_id": 11,
      "name": "example.net",
      "token": "domain-token",
      "state": "complete",
      "ipv4_address":"184.101.179.7",
      "ipv6_address": "2602:00ae:1a06:ce00:9d0e:3e91:89eb:d59f",
      "wildcard_alias": false,
      "ttl": 1800,
      "created_at": "2015-09-10T15:10:56",
      "updated_at": "2015-09-22T13:03:26"
    }
  ]

Delete a domain

Delete the given domain from your account.

GET /v1/dns/delete/:domain

Parameters

Name	Type	Description
:domain	string	The domain name

Example

Delete the domain example.com.

curl -v https://api.dynu.com/v1/dns/delete/example.com \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful.

Add DNS for a domain

POST /v1/dns/add/:domain

Example

Add DNS for domain name example.com with IP address 192.168.0.8 and IPv6 address 2001:cdba::3257:9652.

curl -v -X POST https://api.dynu.com/v1/dns/add \
        -d "{\"name\": \"example.com\", \"ipv4_address\":\"192.168.0.8\", \"ipv6_address\":\"2001:cdba::3257:9652\"}" \
        -H "Content-Type: application/json" \
        -H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the domain.

    {
      "id": 1,
      "user_id": 11,
      "name": "example.com",
      "token": "domain-token",
      "state": "complete",
      "ipv4_address":"192.168.0.8",
      "ipv6_address": "2001:cdba::3257:9652",
      "wildcard_alias": false,
      "ttl": "1800",
      "created_at": "2015-07-28T15:01:13",
      "updated_at": "2015-09-10T13:03:15"
    }

IPv6 Address

Enable IPv6 address

GET /v1/dns/enableipv6/:domain

Parameters

Name	Type	Description
:domain	string, integer	The domain name or id

Example

Enable IPv6 address for example.com.

curl -v https://api.dynu.com/v1/dns/enableipv6/example.com \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the domain.

    {
      "id": 1,
      "user_id": 11,
      "name": "example.com",
      "token": "domain-token",
      "state": "complete",
      "ipv4_address":"174.23.124.56",
      "ipv6_address": "2001:cdba::3257:9652",
      "wildcard_alias": true,
      "ttl": 1800,
      "created_at": "2015-07-28T15:01:13",
      "updated_at": "2015-09-10T13:03:15"
    }

Disable IPv6 address

GET /v1/dns/disableipv6/:domain

Parameters

Name	Type	Description
:domain	string, integer	The domain name or id

Example

Disable IPv6 address for example.com.

curl -v https://api.dynu.com/v1/dns/disableipv6/example.com \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the domain.

    {
      "id": 1,
      "user_id": 11,
      "name": "example.com",
      "token": "domain-token",
      "state": "complete",
      "ipv4_address":"174.23.124.56",
      "ipv6_address": "",
      "wildcard_alias": false,
      "ttl": 1800,
      "created_at": "2015-07-28T15:01:13",
      "updated_at": "2015-09-10T13:03:15"
    }

Wildcard Alias

Enable IPv4/IPv6 wildcard alias

GET /v1/dns/enableipv4wildcard/:domain
GET /v1/dns/enableipv6wildcard/:domain

Parameters

Name	Type	Description
:domain	string	The domain name

Example

Enable IPv4 wildcard alias for example.com.

curl -v https://api.dynu.com/v1/dns/enableipv4wildcard/example.com \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the domain.

    {
      "id": 1,
      "user_id": 11,
      "name": "example.com",
      "token": "EKQKSSRPSFTXUPNLYIEZ",
      "state": "complete",
      "ipv4_address":"174.23.124.56",
      "ipv6_address": "",
      "wildcard_alias": true,
      "ttl": 1800,
      "created_at": "2015-07-28T15:01:13",
      "updated_at": "2015-09-10T13:03:15"
    }

Disable IPv4/IPv6 wildcard alias

GET /v1/dns/disableipv4wildcard/:domain
GET /v1/dns/disableipv6wildcard/:domain

Parameters

Name	Type	Description
:domain	string	The domain name

Example

Disable IPv4 wildcard alias for example.com.

curl -v https://api.dynu.com/v1/dns/disableipv4wildcard/example.com \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the domain.

    {
      "id": 1,
      "user_id": 11,
      "name": "example.com",
      "token": "EKQKSSRPSFTXUPNLYIEZ",
      "state": "complete",
      "ipv4_address":"174.23.124.56",
      "ipv6_address": "",
      "wildcard_alias": false,
      "ttl": 1800,
      "created_at": "2015-07-28T15:01:13",
      "updated_at": "2015-09-10T13:03:15"
    }

DNS Records

List records for a domain name

GET /v1/dns/records/:domain

Parameters

Name	Type	Description
:domain	string	The domain name

Example

List records for domain example.com.

curl -v https://api.dynu.com/v1/dns/records/example.com \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the list of DNS records

  [
    {
      "host": "mx1.dynu.com",
      "priority": 10,
      "id": 1852562,
      "domain_id": 7341211,
      "domain_name": "example.com",
      "node_name": "",
      "hostname": "example.com",
      "record_type": "MX",
      "ttl": 1800,
      "content": "10 mx1.dynu.com",
      "state": true
    },
    {
      "host": "mx2.dynu.com",
      "priority": 20,
      "id": 1852563,
      "domain_id": 7341211,
      "domain_name": "example.com",
      "node_name": "",
      "hostname": "example.com",
      "record_type": "MX",
      "ttl": 1800,
      "content": "20 mx2.dynu.com",
      "state": true
    },
    {
      "host": "somedomain.com",
      "id": 1852588,
      "domain_id": 7341211,
      "domain_name": "example.com",
      "node_name": "mail",
      "hostname": "mail.example.com",
      "record_type": "CNAME",
      "ttl": 1800,
      "content": "somedomain.com",
      "state": true
    },
    {
      "text_data": "This is some txt record.",
      "id": 1852589,
      "domain_id": 7341211,
      "domain_name": "example.com",
      "node_name": "",
      "hostname": "example.com",
      "record_type": "TXT",
      "ttl": 1800,
      "content": "This is some txt record.",
      "state": false
    }
  ]

Create a record

POST /v1/dns/record/add

Base Input

Name	Type	Description
domain_name	string	Required.
node_name	string	Optional. Default is empty. Required for CNAME and RP record.
record_type	string	Required. A, AAAA, CANME, TXT etc.
ttl	integer	Optional. Default is 90 seconds.
state	bool	Required.

A record

Input

Name	Type	Description
location	string	For A and AAAA record. Optional. Default is empty. Used for IP update.
ipv4_address	string	For A record. Optional. Default is the IP address from where the request originates.

Example

Add an A record for domain name example.com with node namesub.

curl -v -X POST https://api.dynu.com/v1/dns/record/add \
        -d "{\"ipv4_address\":\"192.168.0.1\", \"ipv6_address\":\"2001:0db8:85a3:0000:0000:8a2e:0370:7334\", \"domain_name\":\"example.com\", \"node_name\":\"sub\", \"record_type\":\"A\", \"ttl\":\"1800\", \"state\":\"true\" }" \
        -H "Content-Type: application/json" \
        -H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the DNS record.

    {
      "location": "",
      "ipv4_address": "192.168.0.1",
      "id": 1274272,
      "domain_id": 7341211,
      "domain_name": "example.com",
      "node_name": "sub",
      "hostname": "sub.example.com",
      "record_type": "A",
      "ttl": 1800,
      "content": "192.168.0.1",
      "state": true
    }

Responds with with the error message if bad request.

AAAA record

Input

Name	Type	Description
location	string	For A and AAAA record. Optional. Default is empty. Used for IP update.
ipv6_address	string	For AAAA record. Optional. Default is the IP address from where the request originates.

Example

Add an AAAA record for domain name example.com with node namesub.

curl -v -X POST https://api.dynu.com/v1/dns/record/add \
        -d "{\"ipv6_address\":\"2002:4559:1FE2:0:0:0:4559:1FE2\", \"domain_name\":\"example.com\", \"node_name\":\"sub\", \"record_type\":\"AAAA\", \"ttl\":\"1800\", \"state\":\"true\" }" \
        -H "Content-Type: application/json" \
        -H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the DNS record.

    {
      "location": "",
      "ipv6_address": "2002:4559:1FE2:0:0:0:4559:1FE2",
      "id": 1274273,
      "domain_id": 7341211,
      "domain_name": "example.com",
      "node_name": "sub",
      "hostname": "sub.example.com",
      "record_type": "AAAA",
      "ttl": 1800,
      "content": "2002:4559:1FE2:0:0:0:4559:1FE2",
      "state": true
    }

Responds with with the error message if bad request.

AFSDB record

Input

Name	Type	Description
host	string	For AFSDB, CNAME, MX record. Required.
sub_type	int	For AFSDB record. Required. AFSDBSubType(enum):1,2,3.

Example

Add an AFSDB record for domain name example.com.

curl -v -X POST https://api.dynu.com/v1/dns/record/add \
        -d "{\"host\":\"myserver.com\", \"sub_type\":\"1\", \"domain_name\":\"example.com\", \"node_name\":\"\", \"record_type\":\"AFSDB\", \"ttl\":\"1800\", \"state\":\"false\" }" \
        -H "Content-Type: application/json" \
        -H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the DNS record.

    {
      "host": "myserver.com",
      "sub_type": "1",
      "id": 1274274,
      "domain_id": 7341211,
      "domain_name": "example.com",
      "node_name": "",
      "hostname": "example.com",
      "record_type": "AFSDB",
      "ttl": 1800,
      "content": "1 myserver.com",
      "state": false
    }

Responds with with the error message if bad request.

HINFO record

Input

Name	Type	Description
hardware	string	For HINFO record. Required.
operating_system	string	For HINFO record. Required.

Example

Add an HINFO for domain name example.com.

curl -v -X POST https://api.dynu.com/v1/dns/record/add \
        -d "{\"hardware\":\"Intel Xeon\", \"operating_system\":\"Windows\", \"record_type\":\"HINFO\", \"ttl\":\"1800\", \"state\":\"true\" }" \
        -H "Content-Type: application/json" \
        -H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the DNS record.

    {
      "hardware": "Intel Xeon",
      "operating_system": "Windows",
      "id": 1274276,
      "domain_id": 7341211,
      "domain_name": "example.com",
      "node_name": "",
      "hostname": "example.com",
      "record_type": "HINFO",
      "ttl": 1800,
      "content": "Intel Xeon Windows",
      "state": true
    }

Responds with with the error message if bad request.

Key record

Input

Name	Type	Description
flags	string	For Key record. Required. 16 characters, e.g."0100000100000001".
protocol	string	For Key record. Required. KEYProtocol(enum), {TLS, Email, DNSSEC, IPSEC, All}.
algorithm	string	For Key record. Required. KEYAlgorithm(enum:value), {RSAMD5, DiffieHellman, DSA, EllipticCurveCryptography, RSASHA1, IndirectKey}.
key	string	For Key record. Required.

Example

Add a KEY record for domain name example.com.

curl -v -X POST https://api.dynu.com/v1/dns/record/add \
        -d "{\"flags\":\"0100000100000101\", \"protocol\":\"Email\", \"algorithm\":\"RSAMD5\", \"key\":\"SomeBase64encodedstuff\", \"domain_name\":\"example.com\", \"record_type\":\"KEY\", \"ttl\":\"1800\", \"state\":\"true\" }" \
        -H "Content-Type: application/json" \
        -H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the DNS record.

    {
      "flags": "0100000100000001",
      "protocol": "2",
      "algorithm": "1",
      "key": "SomeBase64encodedstuff",
      "id": 1855570,
      "domain_id": 7341211,
      "domain_name": "example.com",
      "node_name": "",
      "hostname": "example.com",
      "record_type": "KEY",
      "ttl": 1800,
      "content": "0100000100000101 2 1 SomeBase64encodedstuff",
      "state": true
    }

Responds with with the error message if bad request.

MX record

Input

Name	Type	Description
host	string	For AFSDB, CNAME, MX record. Required.
priority	int	For TXT, SPF record. Optional. Default is 10.

Example

Add an MX record for domain name example.com.

curl -v -X POST https://api.dynu.com/v1/dns/record/add \
        -d "{\"host\":\"mx2.dynu.com\", \"priority\":\"20\", \"domain_name\":\"example.com\", \"record_type\":\"MX\", \"ttl\":\"1800\", \"state\":\"true\" }" \
        -H "Content-Type: application/json" \
        -H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the DNS record.

    {
      "host": "mx2.dynu.com",
      "priority": "20",
      "id": 1274282,
      "domain_id": 7341211,
      "domain_name": "example.com",
      "node_name": "",
      "hostname": "example.com",
      "record_type": "MX",
      "ttl": 1800,
      "content": "20 mx2.dynu.com",
      "state": true
    }

Responds with with the error message if bad request.

NS record

Input

Name	Type	Description
name_server	string	For NS record. Required.

Example

Add an NS record for domain name example.com.

curl -v -X POST https://api.dynu.com/v1/dns/record/add \
        -d "{\"name_server\":\"ns9.dynu.com\", \"domain_name\":\"example.com\", \"record_type\":\"NS\", \"ttl\":\"1800\", \"state\":\"true\" }" \
        -H "Content-Type: application/json" \
        -H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the DNS record.

    {
      "name_server": "ns9.dynu.com",
      "id": 1855539,
      "domain_id": 7341211,
      "domain_name": "example.com",
      "node_name": "",
      "hostname": "example.com",
      "record_type": "NS",
      "ttl": 1800,
      "content": "ns9.dynu.com",
      "state": true
    }

Responds with with the error message if bad request.

PF record

Input

Name	Type	Description
host	string	For PF record. Optional. Default is empty.
port	int	For PF record. Optional. Default is 81.
title	string	For PF record. Optional. Default is empty.
meta_keywords	string	For PF record. Optional. Default is empty.
meta_description	string	For PF record. Optional. Default is empty.
cloak	bool	For PF record. Optional. Default is false.
include_query_string	bool	For PF record. Optional. Default is true.
use_dynamic_ipv4_address	bool	For PF record. Optional. Default is true.
use_dynamic_ipv6_address	bool	For PF record. Optional. Default is true.

Example

Add a port forwarding record for hostname name blog.example.com to redirect to redirectpage.com on port 8080.

curl -v -X POST https://api.dynu.com/v1/dns/record/add \
        -d "{\"host\":\"redirectpage.com\", \"port\":\"8080\", \"title\":\"My home page\", \"meta_keywords\":\"photo, travel, island, beach\", \"meta_description\":\"This is my personal blog site with travel logs.\", \"cloak\":\"true\", \"include_query_string\":\"true\", \"use_dynamic_ipv4_address\":\"true\", \"use_dynamic_ipv6_address\":\"false\", \"domain_name\":\"example.com\", \"node_name\":\"blog\", \"record_type\":\"PF\" \"state\":\"true\" }" \
        -H "Content-Type: application/json" \
        -H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the DNS record.

    {
      "host": "redirectpage.com",
      "port": "8080",
      "redirect_url": http://redirectpage.com:8080"",
      "title": "My home page",
      "meta_keywords": "photo, travel, island, beach",
      "meta_description": "This is my personal blog site with travel logs.",
      "cloak": "true",
      "include_query_string": "true",
      "use_dynamic_ipv4_address": "true",
      "use_dynamic_ipv6_address": "false",
      "id": 1855542,
      "domain_id": 7341211,
      "domain_name": "example.com",
      "node_name": "blog",
      "hostname": "blog.example.com",
      "record_type": "PF",
      "ttl": 90,
      "content": "http://redirectpage.com:8080",
      "state": true
    }

Responds with with the error message if bad request..

PTR record

Input

Name	Type	Description
host	string	For PTR record. Required.

Example

Add a PTR for hostname testptr.example.com.

curl -v -X POST https://api.dynu.com/v1/dns/record/add \
        -d "{\"host\":\"somedomain.com\", \"domain_name\":\"example.com\", \"node_name\":\"testptr\", \"record_type\":\"PTR\", \"ttl\":\"1800\", \"state\":\"true\" }" \
        -H "Content-Type: application/json" \
        -H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the DNS record.

    {
      "host": "somedomain.com",
      "id": 1855555,
      "domain_id": 7341211,
      "domain_name": "example.com",
      "node_name": "testptr",
      "hostname": "testptr.example.com",
      "record_type": "PTR",
      "ttl": 1800,
      "content": "somedomain.com",
      "state": true
    }

Responds with with the error message if bad request.

RP record

Input

Name	Type	Description
mailbox	string	For RP record. Required.
txt_domain_name	string	For RP record. Required.

Example

Add an RP record for hostname testrp.example.com.

curl -v -X POST https://api.dynu.com/v1/dns/record/add \
        -d "{\"mailbox\":\"admin.example.com\", \"txt_domain_name\":\"Phone: (800)-456-890\", \"domain_name\":\"example.com\", \"node_name\":\"testtp\", \"record_type\":\"AAAA\", \"ttl\":\"1800\", \"state\":\"true\" }" \
        -H "Content-Type: application/json" \
        -H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the DNS record.

    {
      "mailbox": "admin.example.com",
      "txt_domain_name": "Phone: (800)-456-890",
      "id": 1855559,
      "domain_id": 7341211,
      "domain_name": "example.com",
      "node_name": "testrp",
      "hostname": "testrp.example.com",
      "record_type": "RP",
      "ttl": 1800,
      "content": "admin.example.com Phone: (800)-456-890",
      "state": true
    }

Responds with with the error message if bad request.

SPF record

Input

Name	Type	Description
text_data	string	For TXT, SPF record. Required

Example

Add an SPF record for domain name example.com.

curl -v -X POST https://api.dynu.com/v1/dns/record/add \
        -d "{\"text_data\":\"v=spf1 a include:_spf.google.com ~all\", \"domain_name\":\"example.com\", \"record_type\":\"SPF\", \"ttl\":\"1800\", \"state\":\"true\" }" \
        -H "Content-Type: application/json" \
        -H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the DNS record.

    {
      "text_data": "v=spf1 a include:_spf.google.com ~all",
      "id": 1855563,
      "domain_id": 7341211,
      "domain_name": "example.com",
      "node_name": "",
      "hostname": "example.com",
      "record_type": "SPF",
      "ttl": 1800,
      "content": "v=spf1 a include:_spf.google.com ~all",
      "state": true
    }

Responds with with the error message if bad request.

TXT record

Input

Name	Type	Description
text_data	string	For TXT, SPF record. Required

Example

Add a txt record for domain name example.com with node nametesttxt.

curl -v -X POST https://api.dynu.com/v1/dns/record/add \
        -d "{\"text_data\":\"This is a test TXT message.\", \"domain_name\":\"example.com\", \"node_name\":\"testtxt\", \"record_type\":\"TXT\", \"ttl\":\"1800\", \"state\":\"true\" }" \
        -H "Content-Type: application/json" \
        -H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the DNS record.

    {
      "text_data": "This is a test TXT message.",
      "id": 1855563,
      "domain_id": 7341211,
      "domain_name": "example.com",
      "node_name": "testtxt",
      "hostname": "testtxt.example.com",
      "record_type": "TXT",
      "ttl": 1800,
      "content": "This is a test TXT message",
      "state": true
    }

Responds with with the error message if bad request.

SRV record

Input

Name	Type	Description
port	int	For SRV record. Required
priority	int	For SRV record. Required
weight	int	For SRV record. Required
target	string	For SRV record. Required
service	string	For SRV record. Required
protocol	string	For SRV record. Required

Example

Add an SRV record for hostname minecraft.example.com.

curl -v -X POST https://api.dynu.com/v1/dns/record/add \
        -d "{\"port\":\"27165\", \"priority\":\"0\", \"weight\":\"5\", \"target\":\"myminecraft.com\", \"service\":\"minecraft\", \"protocol\":\"tcp\", \"domain_name\":\"example.com\", \"node_name\":\"minecraft\", \"record_type\":\"SRV\", \"ttl\":\"1800\", \"state\":\"true\" }" \
        -H "Content-Type: application/json" \
        -H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the DNS record.

    {
      "port": 27165,
      "priority": "0",
      "weight": "5",
      "target": "myminecraft.com",
      "service": "minecraft",
      "protocol": "tcp",
      "id": 1852848,
      "domain_id": 7341211,
      "domain_name": "example.com",
      "node_name": "minecraft",
      "hostname": "_minecraft._tcp._minecraft.minecraft.example.com",
      "record_type": "SRV",
      "ttl": 1800,
      "content": "0 5 27165 myminecraft.com",
      "state": true

Responds with with the error message if bad request.

UF record

Input

Name	Type	Description
redirect_url	string	For UF record. Required. For example, https://www.cnn.com.
title	string	For PF record. Optional. Default is empty.
meta_keywords	string	For PF record. Optional. Default is empty.
meta_description	string	For PF record. Optional. Default is empty.
cloak	bool	For PF record. Optional. Default is false.
include_query_string	bool	For PF record. Optional. Default is true.

Example

Add a URL forwarding record for hostname testuf.example.com to forward to https://google.com.

curl -v -X POST https://api.dynu.com/v1/dns/record/add \
        -d "{\"redirect_url\":\"https://google.com\", \"domain_name\":\"example.com\", \"node_name\":\"testuf\", \"record_type\":\"UF\", \"ttl\":\"1800\", \"state\":\"true\" }" \
        -H "Content-Type: application/json" \
        -H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the DNS record.

    {
      "redirect_url": "https://www.yahoo.com",
      "title": "",
      "meta_keywords": "",
      "meta_description": "",
      "cloak": "false",
      "include_query_string": "false",
      "id": 1855565,
      "domain_id": 7341211,
      "domain_name": "example.com",
      "node_name": "testuf",
      "hostname": "testuf.example.com",
      "record_type": "UF",
      "ttl": 1800,
      "content": "https://google.com",
      "state": true
    }

Responds with with the error message if bad request.

Get a record

GET /v1/dns/record/get/:id

Parameters

Name	Type	Description
:id	integer	The record id

Example

Get the record with ID 1852848 which is an SRV record for minecraft.example.com:

curl -v https://api.dynu.com/v1/dns/record/get/1852848 \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the DNS record.

Enable a record

GET /v1/dns/record/enable/:id

Parameters

Name	Type	Description
:id	integer	The record id

Example

Enable the record with ID 1852589 which is a TXT record for domain name example.com.

curl -v https://api.dynu.com/v1/dns/record/enable/1852589 \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Returns the record with the state true.

    {
      "text_data": "This is some txt record.",
      "id": 1852589,
      "domain_id": 7341211,
      "domain_name": "example.com",
      "node_name": "",
      "hostname": "example.com",
      "record_type": "TXT",
      "ttl": 1800,
      "content": "This is some txt record.",
      "state": true
    }

Disable a record

GET /v1/dns/record/disable/:id

Parameters

Name	Type	Description
:id	integer	The record id

Example

Disable the record with ID 1852891 which is a RP (Responsible Person) record rp.example.com.

curl -H 'X-Dynu-Token: <email>:<token>' \
        -H 'Accept: application/json'\
        -H 'Content-Type: application/json' \
        https://api.dynu.com/v1/dns/record/disable/1852891

Response

Returns the record with the state false.

    {
      "mailbox": "admin.example.com",
      "id": 1852891,
      "domain_id": 7341211,
      "domain_name": "example.com",
      "node_name": "rp",
      "hostname": "rp.example.com",
      "record_type": "RP",
      "ttl": 1800,
      "content": "admin.example.com Phone: (800)-652-4786",
      "state": false
    }

Delete a record

GET /v1/dns/record/delete/:id

Parameters

Name	Type	Description
:id	integer	The record id

Example

Delete the record with ID 1852895 which is an A record for subdomain name sub.example.com:

curl -v https://api.dynu.com/v1/dns/record/delete/1852895 \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK on success. Returns true.

Email Service

Domains

List a list of domains

GET /v1/email/domains

Example

curl -v https://api.dynu.com/v1/email/domains \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns a list of domain names with email service properties.

  [
    {
      "id": 1,
      "user_id": 11,
      "name": "example.com",
      "token": "domain-token",
      "state": "Complete",
      "type": "FullServiceEmail",
      "auto_renewal": true,
      "anti_spam": false,
      "etrn_host": null,
      "etrn_port": 0,
      "etrn_connection_security": null,
      "etrn_retry_in terval": 0,
      "catch_all_address":"someaddress@gmail.com",
      "plus_addressing": false,
      "plus_addressing_character": "+",
      "expires_on": "2016-07-28T14:57:08",
      "created_at": "2015-07-28T15:01:13",
      "updated_at": "2015-09-10T13:03:15"
    },
    {
      "id": 2,
      "user_id": 11,
      "name": "example1.com",
      "token": "domain-token",
      "state": "Complete",
      "type": "SMTPOutboundRelay",
      "auto_renewal": true,
      "anti_spam": false,
      "etrn_host": null,
      "etrn_port": 0,
      "etrn_connection_security": null,
      "etrn_retry_in terval": 0,
      "plus_addressing": false,
      "plus_addressing_character": null,
      "expires_on": "2017-01-23T18:24:41",
      "created_at": "2016-01-23T18:01:27",
      "updated_at": "2016-01-2 3T18:01:27"
    },
    {
      "id": 3,
      "user_id": 11,
      "name": "example2.com",
      "token": "domain-token",
      "state": "Complete",
      "type": "EmailStoreForward",
      "auto_renewal": true,
      "anti_spam": false,
      "etrn_host": "mail.example2.com",
      "etrn_port": 26,
      "etrn_connection_security": "SSLTLS",
      "etrn_retry_in terval": 10,
      "plus_addressing": false,
      "plus_addressing_character": null,
      "expires_on": "2017-11-29T13:24:35",
      "created_at": "2015-11-29T13:19:52",
      "updated_at": "2016-01-09T0 3:49:20"
    },
    {
      "id": 4,
      "user_id": 11,
      "name": "example3.com",
      "token": "domain-token",
      "state": "Complete",
      "type": "EmailBackup",
      "auto_renewal": true,
      "anti_spam": false,
      "etrn_host": "mail.example3.com",
      "etrn_port": 2525,
      "etrn_connection_security": "None",
      "etrn_retry_in terval": 20,
      "plus_addressing": false,
      "plus_addressing_character": null,
      "expires_on": "2017-11-29T13:21:44",
      "created_at": "2015-11-29T13:21:35",
      "updated_at": "2015-12-23T13:47:27"
    },
    {
      "id": 5,
      "user_id": 11,
      "name": "example4.com",
      "token": "domain-token",
      "state": "Complete",
      "type": "EmailForward",
      "auto_renewal": true,
      "anti_spam": true,
      "etrn_host": null,
      "etrn_port": 0,
      "etrn_connection_security": null,
      "etrn_retry_in terval": 0,
      "plus_addressing": false,
      "plus_addressing_character": null,
      "expires_on": "2016-07-28T14:57:36",
      "created_at": "2015-11-29T14:57:36",
      "updated_at": "2015-12-23T14:26:39"
    },
  ]

Get a domain

Get a domain name with email service properties

Get /v1/email/get/:domain

Parameters

Name	Type	Description
:domain	string, integer	The domain name

Example

Get the domain example.com.

curl -v https://api.dynu.com/v1/email/get/example.com \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful.returns the domain name with email service properties.

    {
      "id": 1,
      "user_id": 11,
      "name": "example.com",
      "token": "domain-token",
      "state": "Complete",
      "type": "FullServiceEmail",
      "auto_renewal": true,
      "anti_spam": false,
      "etrn_host": null,
      "etrn_port": 0,
      "etrn_connection_security": null,
      "etrn_retry_in terval": 0,
      "catch_all_address":"yexiaos@hotmail.com",
      "plus_addressing": false,
      "plus_addressing_character": "+",
      "expires_on": "2016-07-28T14:57:08",
      "created_at": "2015-07-28T15:01:13",
      "updated_at": "2015-09-10T13:03:15"
    }

Accounts

Add an email account

POST /v1/email/email_account_add/:domain/:account

Parameters

Name	Type	Description
:account	string, integer	The email address

Add the email account admin@example.com.

curl -v -X POST https://api.dynu.com/v1/email/email_account_add/example.com \
        -d "{\"email_address\": [\"admin@example.com\",\"password\": \"somepassword\",\"state\": \"active\",\"use_forwarding\": \"true\", \"keep_original_messsage\": \"true\",\"forward_address\": \"thomas@gmail.com\" ]}" \
        -H "Content-Type: application/json" \
        -H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful. Return the email account.

    {
      "id": 34,
      "domain_id": 277,
      "email_address": "admin@example.com",
      "password":null,
      "state": "Active",
      "use_forwarding":true,
      "keep_original_messsage": true,
      "forward_address": "thomas@gmail.com",
    }

}

Get an email account

GET /v1/email/get/:account

Parameters

Name	Type	Description
:account	string, integer	The email address

Get the email account admin@example.com.

curl -v https://api.dynu.com/v1/email/get/admin@example.com \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful. Returns the email account.

List email accounts

GET /v1/email/email_accounts/:domain

Example

curl -v https://api.dynu.com/v1/email/email_accounts/example.com \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns a list of email accounts.

  [
    {
      "id": 34,
      "domain_id": 277,
      "email_address": "admin@example.com",
      "password":null,
      "state": "Active",
      "use_forwarding":true,
      "keep_original_messsage": true,
      "forward_address": "thomas@gmail.com",
    },
    {
      "id": 35,
      "domain_id": 277,
      "email_address": "tom@example.com",
      "password":null,
      "state": "Inactive",
      "use_forwarding":true,
      "keep_original_messsage": true,
      "forward_address": "tom@yahoo.com",
    },
    {
      "id": 36,
      "domain_id": 277,
      "email_address": "amanda@example.com",
      "password":null,
      "state": "Active",
      "use_forwarding":false,
      "keep_original_messsage": false,
      "forward_address": null,
    }
  ]

Remove an email account

Get /v1/email/email_account_remove/:account

Parameters

Name	Type	Description
:account	string, integer	The email address

Example

Remove the email account admin@example.com.

curl -v https://api.dynu.com/v1/email/email_account_remove/admin@example.com \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful. Returns the rest of email accounts for that domain name.

  [
    {
      "id": 35,
      "domain_id": 277,
      "email_address": "tom@example.com",
      "password":null,
      "state": "Inactive",
      "use_forwarding":true,
      "keep_original_messsage": true,
      "forward_address": "tom@yahoo.com",
    } ,
    {
      "id": 36,
      "domain_id": 277,
      "email_address": "amanda@example.com",
      "password":null,
      "state": "Active",
      "use_forwarding":false,
      "keep_original_messsage": false,
      "forward_address": null,
    }
  ]

Enable an email account

GET /v1/email_account_enable/:account

Example

Enable email account amanda@example.com

curl -v https://api.dynu.com/v1/email/email_account_enable/amanda@example.com \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the email account.

    {
      "id": 36,
      "domain_id": 277,
      "email_address": "amanda@example.com",
      "password":null,
      "state": "Active",
      "use_forwarding":false,
      "keep_original_messsage": false,
      "forward_address": null,
    }

Disable an email account

GET /v1/email_account_disable/:account

Example

Disable email account amanda@example.com

curl -v https://api.dynu.com/v1/email/email_account_disable/amanda@example.com \
-H "Content-Type: application/json" \
-H "Authorization: Bearer <token>"

Response

Responds with HTTP/1.1 200 OK if successful, returns the email account.

    {
      "id": 36,
      "domain_id": 277,
      "email_address": "amanda@example.com",
      "password":null,
      "state": "Inactive",
      "use_forwarding":false,
      "keep_original_messsage": false,
      "forward_address": null,
    }

Dritta!

Molto bene!

Oh, scatto!

Avvertimento!

API Documentation

API Documentation

Dritta!

Molto bene!

Oh, scatto!

Avvertimento!

Overview

Getting Started

Obtain OAuth keys

Get an Access Token

Make an API call

Ping

Ping to verify connectivity to our platform

Domain Registration

Domains

Get a domain

List domains

Cancel a domain

Auto-Renewal

Enable auto-renewal for a domain name

Disable auto-renewal for a domain name

Lock/Unlock

Lock/Unlock a domain name

Unlock a domain name

Name Servers

Get name servers for a domain name

Add name servers for a domain name

Delete name servers for a domain name

Make a name server primary for a domain name

DNS

Domains

Get a domain

List domains

Delete a domain

Add DNS for a domain

IPv6 Address

Enable IPv6 address

Disable IPv6 address

Wildcard Alias

Enable IPv4/IPv6 wildcard alias

Disable IPv4/IPv6 wildcard alias

DNS Records

List records for a domain name

Create a record

A record

AAAA record

AFSDB record

HINFO record

Key record

MX record

NS record

PF record

PTR record

RP record

SPF record

TXT record

SRV record

UF record

Get a record

Enable a record

Disable a record

Delete a record

Email Service

Domains

List a list of domains

Get a domain

Accounts

Add an email account

Get an email account

List email accounts

Remove an email account

Enable an email account

Disable an email account